SolarBatteryBankCalc
Battery run-time

How long will a cordless power tool charger run on a battery?

A cordless power tool charger draws about 65 W. How long it runs depends on your battery's capacity, voltage and chemistry. Adjust the values below for your exact setup — the estimate updates live.

What changes the run-time

Three things move the number: your battery's usable capacity (chemistry sets how much you can safely draw — about 80% for LiFePO4, 50% for lead-acid), the cordless power tool charger's actual power draw (rated watts can differ from running watts, and motors cycle on and off), and inverter losses if you run it on AC. This estimate accounts for usable depth of discharge and typical inverter loss.

To size a complete system around a cordless power tool charger and other loads, use the full system calculator.

Related appliances

More tools

Frequently asked questions

How long will a cordless power tool charger run on a 100Ah 12V LiFePO4 battery?

A cordless power tool charger drawing about 65 W will run roughly 14.0 hours on a 100Ah 12V LiFePO4 battery (using ~80% usable capacity and typical inverter loss). Lead-acid of the same rating gives less, because only about 50% is usable.

How many watts does a cordless power tool charger use?

A typical cordless power tool charger draws around 65 W, though actual draw varies by model and, for motor-driven appliances, cycles on and off.

Sources & standards

Typical device wattage is a planning figure, not a spec for any one model — check the nameplate or manual of your specific unit.

Estimates for planning only. Verify with a meter; see the methodology.